District Traffic Data
Download the latest 5-minute aggregate file or browse recent files.
View 5-minute field specifications →| District | Dataset | Downloads |
|---|---|---|
| 03District 3 | 5-minute aggregate | |
| 04District 4 | 5-minute aggregate | |
| 05District 5 | 5-minute aggregate | |
| 06District 6 | 5-minute aggregate | |
| 07District 7 | 5-minute aggregate | |
| 08District 8 | 5-minute aggregate | |
| 10District 10 | 5-minute aggregate | |
| 11District 11 | 5-minute aggregate | |
| 12District 12 | 5-minute aggregate |
These are 5-minute aggregate data, not 30-second raw observations. Data availability and publication times may vary by district.
Data Format & Field Specifications
Use these field definitions to interpret the traffic data and match station identifiers to the station configuration metadata.
5-Minute Aggregate DataStation-level summaries and repeating per-lane fields
Station-Level Fields
| Field | Description | Units / format |
|---|---|---|
| Timestamp | Beginning of the summary interval. For example, 08:00:00 covers measurements collected from 08:00:00 through 08:04:59. Seconds are always 00 for five-minute aggregations. | MM/DD/YYYY HH24:MI:SS |
| Station | Unique station identifier. Use this value to cross-reference the metadata files. | Identifier |
| District | Caltrans district number. | District # |
| Freeway # | Freeway number. | Freeway # |
| Direction of Travel | Direction of travel. | N | S | E | W |
| Lane Type | Lane classification. See the lane type codes below. | Code |
| Station Length | Segment length covered by the station. | miles |
| Samples | Total number of samples received for all lanes. | Count |
| % Observed | Percentage of individual lane points at this location that were observed rather than imputed. | % |
| Total Flow | Sum of flows over the five-minute period across all lanes. The basic five-minute rollup normalizes flow by the number of good samples received from the controller. | Vehicles / 5 min |
| Avg Occupancy | Average occupancy across all lanes over the five-minute period, expressed as a decimal from 0 to 1. | Fraction (0–1) |
| Avg Speed | Flow-weighted average speed across all lanes over the five-minute period. If flow is 0, the arithmetic mean of five-minute station speeds is used. | mph |
Lane Type Codes
- CD
- Collector / distributor
- CH
- Conventional highway
- FF
- Freeway-to-freeway connector
- FR
- Off-ramp
- HV
- HOV
- ML
- Mainline
- OR
- On-ramp
Per-Lane Fields
The following five fields repeat for each lane. N ranges from 1 to the number of lanes at the station.
| Field | Description | Units / format |
|---|---|---|
| Lane N Samples | Number of good samples received for lane N. | Count |
| Lane N Flow | Total flow for lane N over the five-minute period, normalized by the number of good samples. | Vehicles / 5 min |
| Lane N Avg Occ | Average occupancy for lane N, expressed as a decimal from 0 to 1. | Fraction (0–1) |
| Lane N Avg Speed | Flow-weighted average of lane N speeds. If flow is 0, the arithmetic mean of five-minute lane speeds is used. | mph |
| Lane N Observed | Indicates whether the data were observed or imputed. | 1 = observed; 0 = imputed |
Reading occupancy: Occupancy values are described as fractions from 0 to 1: for example, 0.25 means 25%. The source specification labels the units as “%”; this draft follows the stated decimal representation, pending confirmation.
30-Second Raw DataField-reported samples and repeating per-lane measurements
This section describes the 30-second feed format. Download links will be added once available.
Record Fields
| Field | Description | Units / format |
|---|---|---|
| Timestamp | Sample time as reported by the field element. | MM/DD/YYYY HH24:MI:SS |
| Station | Unique station identifier. Use this value to cross-reference the metadata files. | Identifier |
Per-Lane Fields
The following three fields repeat for each lane. N ranges from 1 to the number of lanes at the station.
| Field | Description | Units / format |
|---|---|---|
| Lane N Flow | Number of vehicles that passed over the detector during the sample period. | Vehicles / sample period |
| Lane N Occupancy | Occupancy of lane N during the sample period, expressed as a decimal from 0 to 1. | Fraction (0–1) |
| Lane N Speed | Speed as measured by the detector. Empty if the detector does not report speed. | mph |
Reading occupancy: Values are described as fractions from 0 to 1; 0.25 means 25%. The decimal representation is pending confirmation against the source specification’s “%” unit label.
Which file should I use?
“Latest TXT” links to the district’s 5minagg_latest.txt file. “Recent files” opens its 5-minute data directory, where you can select a timestamped file. Your browser may display a text file instead of downloading it; use your browser’s Save option to keep a local copy.
What is available during the upgrade?
This page provides selected district 5-minute aggregate data links and station configuration metadata. It does not replace the full PeMS interactive application or its historical reporting tools. The new PeMS system is expected in 2027.